C/U/Z/M section-automatically change from C to Z, change time: few seconds. But this design, the cost will be a little higher. Here I will share a more economic design which only can produce M purline, by this way we can save the cost:
Sigma Purlins M purline drawing profile for your reference:
Here is just one size for your reference, by manual adjustment, the production line can produce more sizes meanwhile the cutting blades also needed to be changed also.
Sigma Purlins M purline rolling forming machine manual adjustment type for your reference:
Sigma Purlins M purline rolling forming machine working flow:
Uncoiling---guiding---feeding&flatting---forming---punching&cutting---product receiving
M purline roll forming system | ||
Roll forming system |
Guiding roller | Two pcs |
Diameter of 40mm | ||
Tempering treatment | ||
Usage: to let the sheet feeding into next device in the right position | ||
Feeding&flatting device | 5 pcs | |
Diameter of 70mm | ||
Tempering treatment | ||
Usage: to feed the sheet into forming system positively and remove the sheet radian from coil, avoid the product curve and keep straight | ||
Rolling shaft | Shaft material: 45# steel | |
Shaft diameter: 80 mm | ||
Tempering treatment | ||
Roller | Roller material: Cr15 | |
Quenched treatment | ||
Rolling station number | 15 stations | |
speed | Working speed: 0-25 m/minute without punching and 0-12 m/minute with punching | |
Machine frame | Carbon steel welded structure | |
Machine body | steel plate welded with grinding | |
Bearing | Chinese famous brand Harbin | |
Work power | 15 kw | |
Transmission | By chains |
Where to use the M purline:
Roof purlins:
Use sleeves to shorter purline or assemble 2-span purline staggered
Keep a space of approx. 15 mm between the truss and the purlin
Eaves beams are supplied with an angled top flange, so only 1 profile is needed where roof and wall meet
Options of CUM purline fully automatic type, we will share in next article. For more information, please contact us at any time.